Local Road Management Manual 561 ACTIVITY NO. 201: VEGETATION CONTROL I. Description of Activity Use this activity for removing vegetation and cutting and clearing brush out of roadside areas. II. Purpose The primary purpose is beautiifcation. III. Schedule of Application Schedule when the vegetation within the mowing limits reaches an average height of one meter. If possible, avoid scheduling for secondary roads and in built-up areas where residents mow the vegetation. IV. Construction Method 1. By means of hand tools, cut and remove all debris and vegetation in a distance from the road determined by the PRMF Provincial Coach and Provincial Engineer. 2. Place safety devices during repair works and to be removed after its completion. V. Daily Production Rate 200 - 500 pass-meters VI. Method of Measurement The work to be paid for shall be the number of pass-meters and fractions thereof acceptably cleared and grubbed within the limits indicated on the Plans or as may be adjusted by the PRMF Provincial Coach and Provincial Engineer. Areas not within the clearing and grubbing limits shown on the Plans or not staked for clearing and grubbing will not be measured for payment.