MRI FARADAY CAGE When creating an RF shielded room, EEP construct a faraday cage using copper clad panels. Acoustic insulation is 昀椀tted and the necessary electrical power and data cabling is installed along with various services, all of which are shielded using suitable 昀椀lters. A breakout area of any wall or roof area can be incorporated for ease of magnet delivery or removal. MRI ROOM DOOR The MRI shielded door is an important part of any MRI shielded room, therefore the design and quality of the construction is essential. MRI shielded doors reduce the electronic interference, as well as operating as an acoustic door. The doors can be manufactured to be manually or pneumatically operated with varying acoustic requirements. MRI ROOM WINDOW Being able to see a patient during an MRI scan is important both for the clinical sta昀昀 and for the patient. As well as needing good visibility, the MRI window must o昀昀er the same level of shielding as the rest of the faraday cage. The EEP window has two layers of blackened mesh to meet the RF performance. These must be positioned at a precise angle to each other to prevent visual distortion called fresnel interference. EEP can supply windows of varying sizes and frame designs. MRI INTERNAL FINISHING Once the faraday cage is complete EEP can o昀昀er the follow internal 昀椀nishes: • Internal Wall cladding either using High Pressure Laminated Wall Panels (HPL) or wall board and plastic 昀椀nishes. • Non-ferrous suspended ceiling installation populated with high grade commercial ceiling tiles. • Choice of 昀氀ooring from medical grade commercial vinyl. • Flooring to include welded seams and cap and cove around perimeter. • Internal decoration, where necessary, to match surrounding areas. +44 (0)1799 523 073 | [email protected] | www.euro-emc.co.uk