Local Road Management Manual 377 Example: (Assessed within single lane 50m gauging length— See diagram “Sealant in Joints”) Measurements: Length of Joint with no/poor sealant Joint 1 0.0m Joint 2 1.5m Joint 3 1.5m Joint 4 3.0m Joint 5 0.0m Joint 6 2.5m Joint 7 0.0m Joint 8 2.0m Joint 9 0.0m Joint 10 2.0m TOTAL 12.5m MEASUREMENT The length of deteriorated joint are recorded to one decimal place for each joint as shown in the example opposite. The length of deteriorated joint sealant cannot exceed the length of the joint. The total length of the joints is not recorded, as this is the same as the lane width. 3.2.2. Faulting at Transverse Joints (Rigid Pavement) Assessed over ten transverse joints Example: Wearing coarse severe– coarse texture